Texas Engineers use transition metal dichalcogenide and laser process to tackle problem polymers.
For outstanding new photonics products; finalists to be judged at Photonics West event in January.
Deal with NATO partner country to provide long-range thermal sights used by snipers.
Singapore project points to new non-invasive ways to monitor biomarkers.
With stellar cast of presenters and a showcase of the latest cutting-edge technologies.
Glass and optical fiber giant says second-quarter sales will be around $200 million higher than previously expected.
Germany reports ‘record’ generation of renewable power in first half of 2024 Fraunhofer ISE reports growth of solar and wind power – while fossil fuel share declines. |
Twente discovers ‘new’ shapes of photons and novel applications Including smarter LED lighting, photonic bits of info controlled by quantum circuits, and nano-sensors. |
PhotonDelta sets up Silicon Valley base Netherlands-based technology accelerator aiming to unify US and European PIC expertise. |
Event camera based on human eye's motion improves robot vision University of Maryland device mimics involuntary movements to stabilize images. |
UCLA develops optical computing for multiplexed data processing and encryption Team led by Aydogan Ozcan presents reconfigurable optical network for multi- dimensional functions. |
Photonics innovation hubs announced worldwide The aims of a new crop of R&D facilities and initiatives are not only innovation but also training. |
Omega Optical, LLC
Meadowlark Optics
Omega Optical, LLC
Hamamatsu Photonics Europe GmbH
Knight Optical Ltd
ECOPTIK
Making Raman Measurements Reproducible 28 Mar Wasatch Photonics Raman OEM applications need consistent spectra to deliver dependable answers. A good-quality OEM spectrometer should, by design, exhibit low unit-to-unit variability from the start, and any remaining small differences should be corrected in order to achieve the most robust and repeatable analytical outcomes in the field. Learn how to achieve >99.5% unit-to-unit agreement using a series of simple corrections. |
UV Curing Adhesive Used in Electro-Optical Studies 07 Jun Master Bond Electro-optical (EO) polymers offer several advantages over inorganic materials in the fabrication of optical waveguide structures. Master Bond UV15 has been selected for use in the fabrication of polymer optical waveguides for a variety of applications. Read this case study to learn more about how UV15 helped the researchers achieve their goal. |
Imaging in Challenging Lighting Conditions — A Better Way 07 Sep 2023 Teledyne Lumenera Choosing just the right camera for a particular application can be difficult. Common cameras specifications that are normally considered include resolution and frame rate. However, lighting is an external factor that is potentially even more important to consider. This document highlights how high conversion gain (HCG) and low conversion gain (LCG) camera capabilities can be beneficial in challenging lighting conditions, along with examples of imaging applications where these challenges commonly occur. |
Improving Calibration Accuracy for High-End Spectroradiometers 06 Oct 2023 ADMESY BV Admesy introduces a groundbreaking calibration concept that surpasses the limitations of conventional calibration light sources. |
© 2024 SPIE Europe |
|