Optics.org
daily coverage of the optics & photonics industry and the markets that it serves
Featured Showcases
Photonics West Showcase
Optics+Photonics Showcase
Menu
Historical Archive

Photonic fibers weave smart fabrics

17 Jun 2002

Glass-coated polymer fibers reflect more light at certain wavelengths than the best metallic reflectors.

Courtesy of Physics Web

The communications and textiles industries could benefit from tough glass-coated polymer fibers that can be woven into fabrics. Developed by Shandon Hart of Massachusetts Institute of Technology in the US and colleagues, the fibers can also be drawn out to different diameters to customize their optical properties (Science 296 510).

Man-made fibers are robust and versatile, and cheap to produce in large quantities. In contrast, optical devices known as dielectric mirrors are fragile and expensive. But Hart and colleagues have combined the resilience of synthetic fibers with the properties of a dielectric mirror to create a fiber that could be woven into fabrics to make radiation shields and filters.

Dielectric mirrors are made of alternating layers of two materials with different refractive indices. These layers give the mirror a 'photonic band gap', so that it reflects light in a certain range of wavelengths, but absorbs light outside this range. Dielectric mirrors are widely used in optical communications systems to reflect light of selected wavelengths.

Hart's team made the fibers from arsenic triselenide, a glass with a refractive index of 2.8, and poly(ether sulphone), a polymer with a refractive index of 1.6. The researchers deposited a layer of glass on each side of a sheet of polymer, and rolled the glass-coated polymer sheet around a polymer core several times.

This produced a fiber 'preform' with 21 alternating layers of glass and polymer, which was then drawn out into fibres with diameters ranging from 175 to 500 µm.

The diameter of a fiber determines the thickness of its dielectric layers, and therefore its reflectivity characteristics. This allowed the researchers to make fibers with various photonic band gaps.

Hart's team found that these band gaps arose in the infrared portion of the spectrum at the positions predicted by their calculations. This shows that the fibers contained few impurities, were uniform, and kept their optical properties at the high temperatures used in the drawing process.

The fibers are also sensitive to light approaching from any angle, in contrast with some dielectric mirrors that only respond to light that hits their surfaces at right angles.

Hart and colleagues hope that their fibers will be suitable for a wide range of applications. They even suggest that customized fibers could also be woven into textiles, acting as 'bar codes' that could be read to show that fabrics are authentic.

Author
Katie Pennicott is Editor of Physics Web.

Berkeley Nucleonics CorporationTRIOPTICS GmbHChangchun Jiu Tian  Optoelectric Co.,Ltd.ABTechECOPTIKLaCroix Precision OpticsHÜBNER Photonics
© 2024 SPIE Europe
Top of Page