 |
 |
30 Jun 2004
Researchers create a focused laser spot with the highest intensity to date.
Scientists from the Center for Ultrafast Optical Sciences at the University of Michigan, US, claim to have generated a laser spot with a power density of 0.85x1022W/cm2 - the highest intensity ever recorded.
The intense focal spot, which measures 0.8 microns (FWHM) across, was made by optimizing the focusing of pulses from the Center's HERCULES laser system.
The latter is a custom-made Ti:Sapphire laser that uses chirped pulse amplification (CPA) to generate ultrashort pulses with a power of 45 TW (27 fs pulses containing 1.2 J of energy).
The Michigan team uses adaptive optics, a well known technique for correcting wave-front distortion, to focus their pulses to the smallest spot possible. Pulses from HERCULES were reflected off a deformable mirror before being focused down by a paraboloid mirror.
The shape of the deformable mirror was adjusted to correct for any distortions in the beam and optimize the focusing. Using the technique the team managed to generate focused intensities of between 0.66 and 0.85x1022W/cm2.
"It is the laser wave-front fluctuations that will ultimately limit the focused intensity and its spatial resolution," the team told delegates at the post-deadline session of CLEO 2004 in San Francisco in May. "In our case, HERCULES is remarkably stable. The shot-to-shot fluctuation of wave-front has an rms [root mean square] deviation from its average shape of about 1/20."
Gerard Mourou, the Center's director, invented CPA in the late 1980s as a way to amplify pulses to much higher powers. The technique involves stretching an ultrashort pulse to several nanoseconds so that it can amplified without its peak power damaging the gain medium. After amplification the pulse is recompressed to give a very powerful ultrashort pulse.
Author
Oliver Graydon is editor of Optics.org and Opto & Laser Europe magazine.
 |  |  |  |  |  |  |
| © 2024 SPIE Europe |
|
