Optics.org
daily coverage of the optics & photonics industry and the markets that it serves
Featured Showcases
Photonics West Showcase
Optics+Photonics Showcase
Press Releases
Menu
Press Release

Baby's life saved with groundbreaking 3D printed device from U-M that restored his breathing

Date Announced: 23 May 2013

Bioresorbable splint used for first time, successfully stopped life-threatening tracheobronchomalacia, case featured in New England Journal of Medicine.

ANN ARBOR, Mich., May 23, 2013 /PRNewswire-USNewswire/ -- Every day, their baby stopped breathing, his collapsed bronchus blocking the crucial flow of air to his lungs. April and Bryan Gionfriddo watched helplessly, just praying that somehow the dire predictions weren't true.

"Quite a few doctors said he had a good chance of not leaving the hospital alive," says April Gionfriddo , about her now 20-month-old son, Kaiba. "At that point, we were desperate. Anything that would work, we would take it and run with it."

They found hope at the University of Michigan, where a new, bioresorbable device that could help Kaiba was under development. Kaiba's doctors contacted Glenn Green , M.D., associate professor of pediatric otolaryngology at the University of Michigan.

Green and his colleague, Scott Hollister , Ph.D., professor of biomedical engineering and mechanical engineering and associate professor of surgery at U-M, went right into action, obtaining emergency clearance from the Food and Drug Administration to create and implant a tracheal splint for Kaiba made from a biopolymer called polycaprolactone.

On February 9, 2012, the specially-designed splint was placed in Kaiba at C.S. Mott Children's Hospital. The splint was sewn around Kaiba's airway to expand the bronchus and give it a skeleton to aid proper growth. Over about three years, the splint will be reabsorbed by the body. The case is featured today in the New England Journal of Medicine.

"It was amazing. As soon as the splint was put in, the lungs started going up and down for the first time and we knew he was going to be OK," says Green.

Green and Hollister were able to make the custom-designed, custom-fabricated device using high-resolution imaging and computer-aided design. The device was created directly from a CT scan of Kaiba's trachea/bronchus, integrating an image-based computer model with laser-based 3D printing to produce the splint.

"Our vision at the University of Michigan Health System is to create the future of health care through discovery. This collaboration between faculty in our Medical School and College of Engineering is an incredible demonstration of how we achieve that vision, translating research into treatments for our patients," says Ora Hirsch Pescovitz , M.D., U-M executive vice president for medical affairs and CEO of the U-M Health System.

"Groundbreaking discoveries that save lives of individuals across the nation and world are happening right here in Ann Arbor. I continue to be inspired and proud of the extraordinary people and the amazing work happening across the Health System."

Kaiba was off ventilator support 21 days after the procedure, and has not had breathing trouble since then.

"The material we used is a nice choice for this. It takes about two to three years for the trachea to remodel and grow into a healthy state, and that's about how long this material will take to dissolve into the body," says Hollister.

"Kaiba's case is definitely the highlight of my career so far. To actually build something that a surgeon can use to save a person's life? It's a tremendous feeling."

The image-based design and 3D biomaterial printing process can be adapted to build and reconstruct a number of tissue structures. Green and Hollister have already utilized the process to build and test patient specific ear and nose structures in pre-clinical models. In addition, the method has been used by Hollister with collaborators to rebuild bone structures (spine, craniofacial and long bone) in pre-clinical models.

Severe tracheobronchomalacia is rare. About 1 in 2,200 babies are born with tracheomalacia and most children grow out of it by age 2 or 3, although it often is misdiagnosed as asthma that doesn't respond to treatment.

Severe cases, like Kaiba's, are about 10 percent of that number. And they are frightening, says Green. A normal cold can cause a baby to stop breathing. In Kaiba's case, the family was out at a restaurant when he was six weeks old and he turned blue.

"Severe tracheobronchomalacia has been a condition that has bothered me for years," says Green. "I've seen children die from it. To see this device work, it's a major accomplishment and offers hope for these children."

Before the device was placed, Kaiba continued to stop breathing on a regular basis and required resuscitation daily.

"Even with the best treatments available, he continued to have these episodes. He was imminently going to die. The physician treating him in Ohio knew there was no other option, other than our device in development here," Green says.

Kaiba is doing well and he and his family, including an older brother and sister, live in Ohio.

"He has not had another episode of turning blue," says April. "We are so thankful that something could be done for him. It means the world to us."

Source: University of Michigan Health System

Contact

n/a

E-mail: n/a

Web Site: www.med.umich.edu

© 2024 SPIE Europe
Top of Page