Optics.org
daily coverage of the optics & photonics industry and the markets that it serves
Featured Showcases
Photonics West Showcase
Optics+Photonics Showcase
Products
Menu
Product Announcement

532nm Laser

04 Jan 2021

CRYLINK’s 532 nm laser includes Dazzling laser, 532nm Narrow linewidth laser system, 532nm Active Q-switched sub nanosecond laser, 532nm Passive Q-switched Sub Nanosecond Laser, 532nm Single frequency continuous laser, 532nm Single frequency solid state laser and 532nm Microchip laser. Dazzling laser is mainly used in counter terrorism, anti demonstration and other scenes. Narrow linewidth lasers are mainly used in fluoronce spectrum detection. Single frequency CW laser is mainly used in titanium sapphire pump. Active Q-switched sub nanosecond lasers are mainly used in Doppler wind measurement, underwater imaging, point cloud imaging radar, laser for aerosol radar, laser remote sensing and other fields. Passively Q-switched sub nanosecond lasers are mainly used in terahertz generation. Microchip lasers are mainly used in laser micromachining, time resolved Raman spectroscopy, ultrasound imaging, laser induced breakdown spectroscopy, micromachining.

532nm Narrow Linewidth Laser

Narrow linewidth laser system is our special product. This series of products are compact in structure, portable and convenient. The core technologies such as short cavity method, VBG wavelength locking, directional optical feedback, built-in semiconductor refrigeration, etc. are used to realize narrow linewidth, stable power and stable spectral output of laser.

Model   CL532-MIF(S)-50mW-NLM001 CL532-MIF(FP)-50mW-NLM002
Optical Parameter Central Wavelength (nm) 532 532
Wavelength Tolerance (nm) ±0.5 ±0.5
Output Power (mW) 50 50
Line Width (nm) <0.1 <0.1
Wavelength Stability ±0.005nm @8H Typ. ±0.005nm @8H Typ.
Power Stability ±1.5% @8H Typ. ±1.5% @8H Typ.
Side Mode Rejection Ratio (dB) 40 40
System Parameter Power Adjustment Range 0100% 0100%
Preheat Time (min) 15 15
Modulation Input 1kHz TTLOr Analog signal0-5V 1kHz TTLOr Analog signal0-5V
Control Interface USBBNC USBBNC
Fiber Interface SMA905 FC/PC
Adaptive Optical Fiber 105µm0.22NA 105µm0.22NA
Power Input 100V-240V 50/60Hz 100V-240V 50/60Hz
System Power Consumption <7W Typ. <7W Typ.
Storage Temperature (℃) -1060 -1060
Storage Humidity 080%RH 080%RH
Operating Temperature (℃) 1035 1035
System Weight (Kg) 2.5 2.5
System Size (mm) 150102200 150102200

Microchip Laser

532nm 2ns Microchip Laser System of MCA Series

MCA series microchip laser is a passively Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure without tail, the single pulse energy is stable, and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include four wavelengths of 1064nm, 532nm, 355nm and 266nm. The full sealing module inside the laser head can be used by customers for secondary development and application.

Model Repetition Frequency  Average Power  Output Energy  Pulse Width 
CL532-100Hz-60μJ-MCA013 0.1 kHz 6 mW 60 uJ 2ns
CL532-100Hz-360μJ-MCA014 0.1 kHz 36 mW 360 uJ 2ns
CL532-1KHz-50μJ-MCA015 1 kHz 50 mW 50 uJ 2ns
CL532-2.5KHz-60μJ-MCA016 2.5 kHz 150 mW 60 uJ 2ns
CL532-5KHz-20μJ-MCA017 5 kHz 100 mW 20 uJ 1.5ns

532nm 550ps Microchip Laser System of MCB Series

MCB series microchip laser products have very ideal narrow pulse width, but also can achieve high single pulse energy. The product is a passive Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure and tailless, the single pulse energy is stable, and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include four wavelengths of 1064nm, 532nm, 355nm and 266nm. The full sealing module inside the laser head can be used by customers for secondary development and application. The superior product performance index makes its application range very wide, especially in laser measurement, which can meet many different kinds of measurement needs, and also has excellent performance in the application of laser seeds.

Model Repetition Frequency (kHz) Average Power (mW) Output Energy (uJ) Pulse Width (ps)
CL532-100Hz-80μJ-MCB007 0.1 8 80 500
CL532-100Hz-180μJ-MCB008 0.1 18 180 500
CL532-1KHz-70μJ-MCB009 1 70 180 500

532nm 750ps Microchip Laser System of MCC Series

MCC series microchip laser products have very ideal narrow pulse width, but also can achieve high single pulse energy. The product is a passive Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure and tailless, the single pulse energy is stable, and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include four wavelengths of 1064nm, 532nm, 355nm and 266nm. The full sealing module inside the laser head can be used by customers for secondary development and application. The superior product performance index makes its application range very wide, especially in laser measurement, which can meet many different kinds of measurement needs, and also has excellent performance in the application of laser seeds. We can also provide 1064nm and 532nm isolators.

Model Repetition Frequency (kHz) Average Power (mW) Output Energy (uJ) Pulse Width (ps)
CL532-100Hz-250μJ-MCC010 0.1 25 250 700
CL532-500Hz-150μJ-MCC011 0.5 75 150 700
CL532-1KHz-40μJ-MCC012 1 40 40 700
CL532-5KHz-35μJ-MCC013 5 175 35 700
CL532-10KHz-20μJ-MCC014 10 200 20 700

532nm 350ps Microchip Laser System of MCD Series

MCD series microchip laser is a passively Q-switched solid-state laser based on semiconductor pump. The laser pulse is pure and tailless, the single pulse energy is stable, and the beam quality is good. The integrated design of semiconductor pump module and laser crystal makes the compact laser head easy to install and integrate. The system supports internal and external triggering. This series of products include four wavelengths of 1064nm, 532nm, 355nm and 266nm. The full sealing module inside the laser head can be used by customers for secondary development and application. This series of lasers have great advantages in seed light, laser micromachining, laser measurement and other applications. We also provide 1064nm and 532nm isolators.

Model Repetition Frequency (kHz) Average Power (mW) Output Energy (uJ) Pulse Width (ps)
CL532-100Hz-75μJ-MCD009 0.1 7.5 75 300
CL532-100Hz-250μJ-MCD010 0.1 25 250 300
CL532-500Hz-65μJ-MCD011 0.5 32 65 300
CL532-1KHz-50μJ-MCD012 1 50 50 300

532nm 550ps Microchip Laser System of MCG Series

MCG series high repetition rate microchip laser series is a semiconductor-pumped passive Q-switched solid-state laser with stable energy, narrow pulse width, good beam quality, and single longitudinal mode operation. This series of laser adopts hermetically sealed design, small size, easy installation and integration, and is widely used in the laser micromachining and analysis instrument industry. Our company can provide users with isolators and power amplification solutions that match the wavelength.

Model Repetition Frequency  Average Power  Output Energy  Pulse Width 
CL532-10KHz-1μJ-MCG001 10kHz 10mW 1uJ 500ps
CL532-50KHz-0.8μJ-MCG002 50kHz 40mW 0.8uJ 500ps
CL532-50KHz-2μJ-MCG003 50kHz 100mW 2uJ 500ps
CL532-100KHz-0.5μJ-MCG004 100kHz 50mW 0.5uJ 500ps
CL532-100KHz-1.5μJ-MCG005 100kHz 150mW 1.5uJ 500ps

532nm 350ps Microchip Laser System of MCH Series

MCH series high repetition rate microchip laser series can achieve high repetition rate while the pulse width is less than 300ps. The product is a passively Q-switched solid-state laser based on semiconductor pump, with stable energy, good beam quality and single longitudinal mode operation. The laser is designed with full seal, small size, convenient for user installation and integration. The system supports internal and external triggering and can be used for secondary development.

Model Repetition Frequency (kHz) Average Power (mW) Output Energy (uJ) Pulse Width (ps)
CL532-1KHz-16μJ-MCH006 1 16 16 300
CL532-5KHz-8μJ-MCH007 5 40 8 280
CL532-10KHz-5μJ-MCH008 10 30 3 280
CL532-20KHz-2.5μJ-MCH009 20 50 2.5 280

Single Frequency Laser 

The single frequency series laser includes single frequency continuous seed source, single frequency continuous amplification + frequency multiplier, single frequency high energy solid-state laser. Based on the non planar ring cavity technology, resonance detection technology, external cavity resonance frequency doubling technology and other engineering technology, the full parameter multi band laser product coverage from narrow linewidth seed source, excitation amplification to nonlinear frequency conversion is realized. By means of advanced engineering design means, the reliability and stability of products are effectively guaranteed in the light mechanical thermal integration analysis, automatic electronic control system development, etc. This series of products are widely used in lidar systems such as Doppler lidar, laser debris observation, laser remote sensing, etc., with the following technical advantages,

  • Hyperspectral characteristics to meet the spectrum fine analysis
  • High quality seed light injection, excellent power amplification
  • Resonance detection technology ensures the single frequency characteristics of each pulse
  • Frequency locking and stabilizing technology

The optical fiber + solid-state scheme can output 532nm green light of > 50W. It adopts PDH frequency locking technology, which is compact, stable and reliable.

532nm Single Frequency Pulsed Laser

Model Energy (mJ) Energy Stability Pulse Width(ns) Repeat Frequency(Hz)  Spot Diameter @ 1/e2
CL532-50mJ-SSL005 50 <2% <10 1-200 ~3
CL532-150mJ-SSL006 150 <2.5% <10 1-200 ~4.5
CL532-250mJ-SSL007 250 <3% <10 1-200 ~6
CL532-400mJ-SSL008 400 <3% <10 1-200 ~8
CL532-50mJ-SLL005 50 <2% <10 1-20 ~3
CL532-150mJ-SLL006 150 <2.5% <10 1-20 ~4.5
CL532-250mJ-SLL007 250 <3% <10 1-20 ~6
CL532-400mJ-SLL008 400 <3% <10 1-20 ~8

532nm Single Frequency Continuous Laser 

Model   CL532-30W-SFCL001
Optical Parameter Central Wavelength (nm) 532±1
Output Power (W) 5~30
Line Width (KHz) <10
Frequency Stability (MHz@30min) <3
Power Stability <±0.5%@2h
Power Adjustable Range 10%-100%
Beam Diameter( 1/e2) <2
Beam Quality M2 <1.5
Beam Divergence Angle (mrad) <0.5
Spectral Line Width (nm) <±0.5
Polarization Extinction Ratio >100:1
Function Parameter Output Method Spatial Light Output
Control Interface DB9,RS422
Powered by 220VAC/50Hz
Output Power (W) <300
Environmental Requirements Operating Temperature (℃) 0 ~ 30
Storage Temperature (℃) -10 ~ +60
Humidity 0-80%
Weight and Size Laser Head Weight (Kg) <15
Power Weight (Kg) <5
Laser Head Size 444*232*150
Power Size 2U

Q-Switched Laser

This series of products include active Q-switching and passive Q-switching microchip two technical solutions to generate sub nanosecond optical pulses, output sub nanosecond laser pulses while maintaining excellent beam quality. For the active Q-switched technology, the jitter of the output optical signal and the trigger signal is less than 1 ns, and for the passive Q-switched microchip laser, the jitter of the output signal and the external trigger signal is less than 10 μ s. The laser can be used alone or as seed source of laser amplifier. At the same time, the laser amplifier of our company can be used to amplify the energy to tens of MJ. At the same time, the wavelength can be extended to 532nm, 355nm, 266nm, etc. The product has the advantages of good beam quality, high peak power, reliable performance, compact structure, simple operation and maintenance. Combined with excellent production technology, this series of products can meet the requirements of airborne, vehicle mounted, high and low temperature and other harsh environments.

532nm Active Q-switched sub nanosecond laser

Optical Parameter

  CL532-3mJ-AQNL001 CL532-5mJ-AQNL002 CL532-10mJ-AQNL003
Energy @532nm (mJ) 3 5 10
Energy Stability 3% 3% 3%
Repeat Frequency (KHz) 110 1~5 1~5
Pulse Width (ns) 1.5 1.5 2.5
Beam Quality M2 2 2 2
Divergence (full angle) (mrad) 1 1 1
Spot diameter1/e2(mm) 2 2 4

Function Parameter

  CL532-3mJ-AQNL001 CL532-5mJ-AQNL002 CL532-10mJ-AQNL003
Control Interface DB9RS422 DB9RS422 DB9RS422
Cooling Method Water cooling Water cooling Water cooling
Powered By 220VAC/50Hz 220VAC/50Hz 220VAC/50Hz

Environmental Requirements

  CL532-3mJ-AQNL001 CL532-5mJ-AQNL002 CL532-10mJ-AQNL003
Operating Temperature (℃) 15 ~ 30 15 ~ 30 15 ~ 30
Storage Temperature (℃) -10 ~ +50 -10 ~ +50 -10 ~ +50
Humidity 0-70% 0-70% 0-70%

532nm Passive Q-switched Sub Nanosecond Laser

Model and Parameter

Optical Parameter

  CL532-60μJ-PQNL004 CL532-120μJ-PQNL005 CL532-200μJ-PQNL006 
Energy @532nm (uJ) 60 120 200
Energy Stability <3% <3% <3%
Repeat Frequency (Hz) 1~500 1~100 1~100
Pulse Width (ns) <1.5 <1.5 <1.5

Function Parameter

  CL532-60μJ-PQNL004 CL532-120μJ-PQNL005 CL532-200μJ-PQNL006 
Control Interface DB9,RS422 DB9,RS422 DB9,RS422
Cooling Method Air-cooled Air-cooled Air-cooled
Powered By 220VAC/50Hz 220VAC/50Hz 220VAC/50Hz
Output Power (W) <50 <80 <100

Environmental Requirements

  CL532-60μJ-PQNL004 CL532-120μJ-PQNL005 CL532-200μJ-PQNL006 
Operating Temperature (℃) 15 ~ 40 15 ~ 40 15 ~ 40
Storage Temperature (℃) -5 ~ +60 -5 ~ +60 -5 ~ +60
Humidity 0-70% 0-70% 0-70%

Weight and Size

  CL532-60μJ-PQNL004 CL532-120μJ-PQNL005 CL532-200μJ-PQNL006 
Laser Weight (Kg) <10 <12 <10
Laser Size (mm) 441*117*96 480*120*96 441*117*96

532nm Dazzle Laser

The laser dazzler uses the 532nm green laser, which is the most sensitive to the human eye. When the eye is irradiated, it can make the eye temporarily blind and feel dizzy, thereby quickly suppressing the enemy without harming human life. Make the opponent’s instant attack or resistance invalid. This product is used for the customer’s long-distance laser refusal system.

Model   CL532-10W-DAL001
Optical Parameter Central Wavelength (nm) 532
Peak Output Power (W) 10
Power Stability 3%
Power Adjustable Range 10%-100%
Output spot size Design according to requirements
Operating mode Continuous / flashing
Flicker frequency 7-10Hz adjustable
Function Parameter Control interface DB9, RS422
cooling method Air cooling
powered by 220VAC/28VDC
Output power 300W
Environmental Requirements Operating Temperature (℃) -15 ~ 50
Storage Temperature (℃) -25 ~ +60
Humidity 0-80%
Weight and Size Laser Head Weight (Kg) 10
Laser Head Size 613*107*100mm

532nm Laser for Aerosol Radar

A matching light source for the customer’s atmospheric particulate lidar for real-time monitoring of local high-density pollution sources. The radar emits a 532nm laser, and the receiving telescope collects the backscattered signals of the aerosol and cloud. The receiver receives vertical and horizontal polarization signals at 532nm and signals in the blind zone, and analyzes its echo intensity and particle depolarization characteristics to achieve Zero-blind detection, distinguishing the distribution of particulate matter and the type of particulate matter.

Model   CL532-500μJ-LAR001
Optical Parameter Central Wavelength (nm) 532
Pulse Energy (uJ) 500
Power Stability 2%
Peak Power (kW) 42
Beam Quality M2 1.3
Repeat Frequency (KHz) 2-7
Pulse Width 12ns@5kHz
Polarization Extinction Ratio 100:1
Function Parameter Service Life (h) 10000
Control Interface DB9RS232
Cooling Method Air Cooling
Powered by 24VDC
Output Power (W) 260
Environmental Requirements Operating Temperature (℃) -20 ~ 60
Storage Temperature (℃) -40 ~ +70
Humidity 0-90%
Weight and Size Laser Head Weight (Kg) 9
Laser Head Size 250*240*105mm

CONTACT DETAILS
Nanjing Crylink Photonics Co.,Ltd
No.3, Hengda Road, Economic and Technological Development Zone, Nanjing, China
No.200,Zhaoxian Road,Jiading District,Shanghai City
Nanjing
Jiangsu
210038
China
Tel: (86)025-68790684
Fax: (86)025-68790685
Email Us
Web Site
© 2024 SPIE Europe
Top of Page