04 Nov 2013 Description
The gSKIN® sensors are thermal detectors. By absorbing the laser power, one side of the sensor is heated. The induced heat flow is measured through 29 ultra-sensitive thermocouples which are placed in a 72 mm2 surface area with a thickness of 0.4 mm. The sensor comes with a 0-level package of optimized polymer, a 1st-level package of aluminum and a black absorber coating.gSKIN® sensors are available in different sizes and geometries. Contact info@greenTEG.com for more information
Calibration
The sensor is thermally calibrateda under steady state conditions with a method cohering to the ISO8301 standard. The sensor is calibrated at a mean temperature of 22.5 °C. Each gSKIN® sensor is shipped with a calibration certificate containing the sensor sensitivity.
Laser Power Measurement
The sensor generates an analog voltage output Vout. The incoming laser power PL is calculated with
PL = Vout / SL
where SL is the sensitivity of the sensor in V/W.
Example:
-Sensor signal: Vout = 50 mV
-Sensitivity: SL = 30 mV/W
-Laser power: PL = 50/30 = 1.667 W |
