Nanopositioner PZ700 with increased life time and freedom from maintenance

Date Announced: 29 Aug 2014

After more than one year in long–term test the nanopositioner PZ700 from piezosystem jena do not show any abrasion or breakdown. The nanopositioner PZ700 is designed for dynamic, single axis positioning tasks of objects of all kind with a mass up to 300 g (0.7 lbs). Because of the quadratic, central aperture, the nanopositioner PZ700 is suited for positioning tasks, where the transmission of light is required or for fibers and wires.

During the long–term test, the nanopositioner PZ700 accomplished more than 100 million cycles at the maximum stroke of 700 µm and a load of 270 g (0.6 lbs). The actuator is driven by a rectangular input signal. Meanwhile, the mechanic components neither show wear nor signs of fatigue. The stroke does not change over the testing period, tilt is on a constant low level.

The nanopositioner PZ700 is characterized by a high number of cycles with constant parameters like tilt, low axial offset, stroke, repeatability etc. Other assets are the freedom of maintenance of the mechanical and electronical components. Therefore a long–term usage without any downtime is possible and the operating time is not disrupted.

For further information about our products call (+49) 3641 66880 or send an email to
info@piezojena.com or visit www.piezosystem.com.

Contact

piezosystem jena, Inc.

2B Rosenfeld Drive
Hopedale, MA 01747
USA

phone: 508 634 66 88
fax: 508 634 68 68
e-mail: usa(at)piezojena.com

E-mail: tkuntze@piezojena.com

Web Site: www.piezosystem.com