AMI designs and manufactures a wide range of OEM electronic products for the laser and electro-optics industries. These products serve applications in medical, military, scientific & industrial markets. Products include capacitor charging power supplies, simmer supplies, Pockels cell drivers, pulsed flashlamp drivers, laser diode drivers, laser rangefinder receivers, laser spot trackers, transimpedance & voltage amplifiers, pulse stretchers, fiber optic links and photodetector-amplifier modules.
Founded in 1979, Analog Modules, Inc. (AMI) designs and manufactures a wide range of OEM electronic products primarily for the laser and electro-optics industries. These products serve applications in military, medical, scientific, and industrial markets.
AMI is located in Longwood, (Orlando) FL. Over 65 full-time employees are involved in design, development, and manufacturing. In April 2001, AMI was acquired by HEICO Corporation as a subsidiary of the Electronic Technologies Group.
Laser electronic products manufactured by AMI include capacitor charging power supplies, simmer supplies, Pockels cell drivers, CW arc lamp drivers, pulsed flashlamp drivers, and mid to high power laser diode drivers. These products are available in a variety of packages, from OEM modules to stand-alone, turn-key systems. Many of these products are certified to the European Medical Standard EN60601-1 as well as UL2601-1.
AMI also offers a complete line of sensors and amplifiers, including hybrid laser rangefinder receivers, linear and logarithmic amplifiers, pulse stretchers, fiber optic links and photodetector-amplifier modules.
AMI’s military products include Laser Rangefinder Receivers, Linear Array Detection Systems, 3D Laser Radar Sensing Electronics, Custom Range Counters, Quadrant Laser Spot Trackers, Capacitor Charging Power Supplies, Pockels Cell Drivers, Laser Diode Drivers and custom assemblies. These products are used in Air, Ship, Man-Pack and Ground Vehicle environments for applications including target designation, laser rangefinding, ground illumination for terrain mapping, wire avoidance, laser fusing, laser warning/countermeasures, IR illumination and mine detection. Many of these products are qualified to meet shock, vibration, temperature and radiation-hardened requirements of MIL-STD-810 and are manufactured to the ANSI J-STD-001 Class 3 workmanship standard.
AMI takes pride that it is certified to ISO 9001:2008 and is committed to product excellence.
AMI strives to maintain the highest standards of ethical conduct and integrity in all areas of our business activities and is in compliance with our Conflict Mineral Policy.