 |
 |
 | Optical Filters in Space 01 Sep 2021 |
| Iridian Spectral Technologies | |
| Book your space now for the "Optical Filters in Space" webinar with industry expert Jason Palidwar - 1st September 9am PST/12pm EST/5pm BST/6pm CET “Space, the final frontier”. Over the past two decades optical filters have established their value as the key wavelength selective elements in many terrestrial photonics applications from telecom to 3D cinema. Rapid growth in two space-based applications, Satcom and Earth Observation, has created new extraterrestrial needs for optical filters. In this webinar we’ll discuss these applications and the optical filters that enable them. |
 | Best Marketing Practices For SMEs With Limited Resources 19 May 2021 |
| optics.org | |
| If you are responsible for marketing of an SME then join Optics.org and our expert panel as we present some industry best marketing practices. We’ll cover current hints and tips, with experienced advice on delivering your marketing message to the widest possible audience for the smallest spend. Webinar starts: 3pm BST/4pm CEST/10am EDT/7am PDT |
 | Designing Photonic Subsystems for Lidar and Sensing 07 May 2021 |
| G&H | |
| Book your place now for the G&H webinar on Designing Photonic Subsystems for Lidar and Sensing. This webinar will look at what’s involved in designing a photonics subsystem for manufacture and assembly (DFMA). We will consider different applications these subsystems can be used for. We will provide a system overview before looking at the importance of component specification and what needs to be taken into account when building subsystems. The latter including electronic and modular design. Webinar starts: 3pm BST/4pm CEST/10am EDT/7am PDT. |
 | Overcoming DLC Coating Challenges on Chalcogenides 24 Feb 2021 |
| EMF, a Dynasil company | |
| Catch up on “Overcoming DLC Coating Challenges on Chalcogenides.” IR optics expert Ray Pini discusses the pros of chalcogenide glass substrates and how to avoid adhesion problems and coating defects most common with DLC coatings. This pre-recorded presentation includes a Q&A with attendees. Download it for free here. |
 | OCT Systems Start to Finish 27 Oct 2020 |
| G&H | |
| This webinar looks at what’s involved in designing an optical coherence tomography (OCT) system for manufacture and assembly (DFMA).
After first looking at how systems have developed since OCT was first used in clinical diagnostics, we will discuss the challenges in taking a design from concept, through engineering, testing, to integration and manufacture. We understand the difficulties and uncertainties around component and subsystem specification and the engineering challenges of integrating multiple components into a complete system. The webinar will cover both spectrometer and swept source based designs. |
| © 2024 SPIE Europe |
|
