Thermopile Detectors

11 May 2017

LASER COMPONENTS has been working with Dexter Research Centre, a world leading

manufacturer of thermopile detectors. Thermopile detectors are passive radiation sensing

devices that require no bias or cooling and generate an output in the range of micro to

millivolts. The spectral absorption of these detectors is flat from the UV to the far infrared with

spectral sensitivity only limited by the choice of optical band pass filters.

The construction of a typical thermopile detector manufactured by Dexter is shown in Figure (1),

the detector consists of a number of hot and cold junctions which form a thermocouple array

mounted on a ceramic substrate which contains an opening. The junctions are connected with

alternating n-type and p-type materials called “arms.” The cold junctions are typically thermally

connected to the detector package and are located around the perimeter of the substrate

opening. The hot junctions define the active area of the detector pattern and are coated with

an energy absorber. They are located in the centre of the detector and are suspended on a thin

membrane, thermally isolating them from the rest of the package.

The voltage produced is proportional to the temperature gradient between junctions and,

unlike pyroelectric detectors, thermopiles are very low noise detectors generating no 1/f or

microphonic noise. Also, thermopile detectors provide a stable output for DC radiation up to a

frequency limited by the time constant of the detector.

Applications include non-contact temperature measurements such as tympanic thermometers,

automobile climate control and occupancy sensing, process temperature monitoring, household

appliances, and radiometers; gas analysis in medical, automotive, and petroleum industries;

hazard control including flame and explosion detection; horizon sensors for scientific and space,

and applications.

More Information http://www.lasercomponents.com/uk/product/miniature-thermopiles/